Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlights and Fog Lights

Model: Jeep Wrangler MK 2, TJ - Years 1997-2007
Part: Headlight

Lift the bonnet and remove the clips securing the front grille to the car body. Disconnect the connector for the dipped beam headlights. Now, you can work directly on the headlights by removing the screws that secure them. Once the headlight is removed, disconnect the connector at the back. Connect the adapter for the new headlight if necessary, connect the adapter's connector to the new headlight, and position it in its housing to secure it with screws. Repeat the process for the headlight on the other side. Remove the lower panel to also replace the lights in the bumper.

Updated on 23 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing Front Headlights on a Jeep Wrangler
Replacing Front Headlights on a Jeep Wrangler
Jeep Wrangler (2007-2018 / MK 3, JK) Start by opening the bonnet and locating the screws that support the central grille, each covered by a recognisable plastic cap, and remove them. Now…
Installation of LED Projector Headlights
Installation of LED Projector Headlights
Jeep Wrangler (2007-2018 / MK 3, JK) Installing LED projector headlights will give the front of the vehicle a very modern and appealing look while ensuring greater brightness; to install…
Is the adjustment of a car's headlights done using two screws?
Is the adjustment of a car's headlights done using two screws?
Jeep Wrangler (2018-2026 / JL, MK 4) The work shown in this video involves a common procedure for most cars on the road, namely the adjustment of the front headlights using adjustment sc…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos