Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Front Headlights on a Jeep Wrangler

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Headlight

See other generations:
Video tutorial

Start by opening the bonnet and locating the screws that support the central grille, each covered by a recognisable plastic cap, and remove them. Now proceed to disconnect the fog light connectors that are anchored to the grille you are about to remove.

To do this, simply pull to disengage the clip fittings. Next, remove the affected headlights after unscrewing the four screws that surround the headlight itself and secure it to the vehicle.

Always be careful not to damage the wires when pulling the headlight out and disconnect the connector. Now you can replace the headlights and reassemble everything.


Updated on 18 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Brake Pads on a Jeep Wrangler?
How to Replace the Front Brake Pads on a Jeep Wrangler?
Jeep Wrangler (2007-2018 / JK, MK 3) To replace the front brake pads on a Jeep Wrangler, first, loosen the wheel bolts of the corresponding wheel. Once the wheel is removed, you will hav…
How to Replace Engine Oil
How to Replace Engine Oil
Jeep Wrangler Change engine oil in the Jeep Wrangler. …
Replacing the Front Headlights on the Jeep Wrangler
Replacing the Front Headlights on the Jeep Wrangler
Jeep Wrangler (1997-2007 / MK 2, TJ) In this video tutorial, you will learn how to remove and replace the front headlights on the Jeep Wrangler, following the instructions provided below…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos