Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Air Filter on a Jeep Gladiator?

Model: Jeep Gladiator JT - Years 2020-2026
Part: Air filter

To replace the air filter on a Jeep Gladiator, open the hood to access the components inside. The filter box is located in the lower left area of the compartment, near the front headlight. To access the filter, loosen the bolts securing the cover and remove it completely. The old filter can now be pulled out of its housing and replaced with a new one. After inserting the new filter, close the box and secure it with the screws.

Updated on 17 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Air Filter on the Jeep Gladiator
How to Replace the Air Filter on the Jeep Gladiator
Jeep Gladiator (2020-2026 / JT) If the engine air filter in your Jeep Gladiator is worn out and causing frequent engine overheating, you need to follow this new guide to replace it …
Where is the fuse box located in the Jeep Gladiator?
Where is the fuse box located in the Jeep Gladiator?
Jeep Gladiator (2020-2026 / JT) If you own a Jeep Gladiator and need to locate the box that contains all the vehicle's fuses, all you have to do is pay attention to the following st…
How to replace the cabin air filter of the Jeep Gladiator
How to replace the cabin air filter of the Jeep Gladiator
Jeep Gladiator (2020-2026 / JT) In order to successfully replace the cabin air filter in your Jeep Gladiator, you must carefully read and follow the steps outlined in the following …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos