Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Radio in a Jeep Gladiator?

Model: Jeep Gladiator JT - Years 2020-2026
Part: Car stereo

To replace the radio in a Jeep Gladiator, remove the plastic cover surrounding the display by unscrewing the two mounting screws underneath. Once these screws are loosened, you can detach the cover to access the screws securing the display. After these screws are removed, pull the device out of its housing, disconnecting the connectors at the back. After removal, connect the new radio and secure it with the appropriate screws.

Updated on 3 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Gladiator (2020-2026 / JT) If you own a Jeep Gladiator and need to locate the box that contains all the vehicle's fuses, all you have to do is pay attention to the following st…
Jeep Gladiator (2020-2026 / JT) To replace the air filter on a Jeep Gladiator, open the hood to access the components inside. The filter box is located in the lower left area of the…
Jeep Gladiator (2020-2026 / JT) To replace the cabin filter in a Jeep Gladiator, open the glove compartment on the passenger side to release its internal retaining pins. Once these …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos