Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Taillights on the Jeep Gladiator?

Model: Jeep Gladiator JT - Years 2020-2026
Part: Tail light

In this tutorial, you will see how to replace the taillights on the Jeep Gladiator, a very simple and quick operation. First, ensure that the key is not in the ignition for safety. Then, open the bed access door and, using an 8mm socket wrench, remove the two bolts located along the inner edge of the light assembly. Once done, grasp the light, pull it towards you, and disengage it from the body. Finally, disconnect the power connector, remove the bulbs, and install the replacement by following the reverse procedure.

Updated on 14 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the Jeep Gladiator?
Where is the fuse box located in the Jeep Gladiator?
Jeep Gladiator (2020-2026 / JT) If you own a Jeep Gladiator and need to locate the box that contains all the vehicle's fuses, all you have to do is pay attention to the following st…
How to replace the battery of the Jeep Gladiator key.
How to replace the battery of the Jeep Gladiator key.
Jeep Gladiator (2020-2026 / JT) If you own the new Jeep Gladiator and want to learn how to replace the car key battery, first, get a flathead screwdriver and a new CR2450 battery. T…
How to Replace the Radio in a Jeep Gladiator?
How to Replace the Radio in a Jeep Gladiator?
Jeep Gladiator (2020-2026 / JT) To replace the radio in a Jeep Gladiator, remove the plastic cover surrounding the display by unscrewing the two mounting screws underneath. Once the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos