Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Tail Lights on a Jeep Gladiator?

Model: Jeep Gladiator JT - Years 2020-2026
Part: Tail light

In this tutorial, you will see how to replace the tail lights on a Jeep Gladiator, a very simple operation. First, ensure the vehicle is off for safety. Then, open the bed access door and, using an 8mm socket wrench, remove the two mounting bolts for the light located on the inner edge. Once done, grasp the light, pull it towards you, and disengage it from the body. Finally, disconnect the power connector, remove the bulbs, and install the replacement by following the exact reverse procedure.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the fuse box located in the Jeep Gladiator?
Where is the fuse box located in the Jeep Gladiator?
Jeep Gladiator (2020-2026 / JT) If you own a Jeep Gladiator and need to locate the box that contains all the vehicle's fuses, all you have to do is pay attention to the following st…
How to Replace the Cabin Air Filter in the Jeep Gladiator?
How to Replace the Cabin Air Filter in the Jeep Gladiator?
Jeep Gladiator (2020-2026 / JT) As shown in this tutorial, replacing the cabin air filter in the Jeep Gladiator is an extremely simple and quick task. First, go to the passenger sid…
How to Replace the Air Filter on a Jeep Gladiator?
How to Replace the Air Filter on a Jeep Gladiator?
Jeep Gladiator (2020-2026 / JT) To replace the air filter on a Jeep Gladiator, open the hood to access the components inside. The filter box is located in the lower left area of the…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos