Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light of a Jeep Compass 2

Model: Jeep Compass 552, MK 2 - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tail light

See other generations:
Video tutorial

To safely remove one of the rear lights (or both) of your Jeep Compass second series, follow the steps outlined in this guide. First, park the car on a flat surface and turn it off completely.

Then, open the boot and lift it fully. Once done, remove the protective caps located at the side of the light and unscrew the screws using a cross-head screwdriver or a battery-powered drill.

Finally, pull the light towards you and disconnect the electrical cable to complete the procedure.


Updated on 1 November 2026 by ScegliAuto


Related tutorials

How to Remove the Rear Light of the Jeep Compass mk2?
How to Remove the Rear Light of the Jeep Compass mk2?
Jeep Compass (2016-2025 / 552, MK 2) In this video tutorial, you can see how to remove the rear light of the Jeep Compass mk2, in case you need to replace one or more bulbs or the light …
How to Replace the Front Headlight on a Jeep Compass
How to Replace the Front Headlight on a Jeep Compass
Jeep Compass (2006-2016 / MK 49, MK 1) Before starting, open the front bonnet of your Jeep Compass. Begin by disassembling and removing the front bumper by unscrewing the fastening screws …
Replacing the Front Headlight Bulb on a Jeep Compass
Replacing the Front Headlight Bulb on a Jeep Compass
Jeep Compass (2016-2025 / 552, MK 2) Today, you will learn how to remove and replace the front headlight bulb on a Jeep Compass. First, remove the screws from the wing on the affected si…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos