Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Kawasaki Vulcan 650 S

Model: Kawasaki Vulcan 650 S
Part: Headlight bulb

Video tutorial

In this tutorial, learn how to replace the front headlamp bulb on a Kawasaki Vulcan 650 S, a straightforward and quick task. First, ensure the key is not inserted for safety.

Position yourself in front of the motorcycle, locate the screws beneath the headlamp, and remove them. Next, separate the headlamp from the base, disconnect the power connector, and remove the circular rubber cap. Finally, release the metal clip, extract the old bulb, and install the replacement by reversing the procedure.


Updated on 2 September 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on the Kawasaki Vulcan 650 S?
How to Replace the Front Headlight Bulb on the Kawasaki Vulcan 650 S?
Vulcan 650 S In this tutorial, you will see how to replace the front headlight bulb on the Kawasaki Vulcan 650 S, a very simple and quick operation. First, ensure…
How to Replace the Front Headlight on the Kawasaki Vulcan 650 S?
How to Replace the Front Headlight on the Kawasaki Vulcan 650 S?
Vulcan 650 S This tutorial shows how to replace the front headlight on the Kawasaki Vulcan 650 S, a very simple and quick operation. First, ensure that the key is…
How to Replace the Headlight Bulb on a Kawasaki Vulcan 650 S?
How to Replace the Headlight Bulb on a Kawasaki Vulcan 650 S?
Vulcan 650 S To replace the headlight bulb on a Kawasaki Vulcan 650 S, loosen the screws that secure the optical unit to its housing. These screws are located at …

How to Set the Time on the Fz6

In this article, you will learn how to adjust the time on the Yamaha Fz6 with the help of a video. The procedure takes little time and requires no tools. To set the time, first start the instrument cluster. If the time is displayed, press both buttons on the side of the cluster simultaneously. When the time starts to flash, use the lower button to adjust the hour. Once the hour is set, confirm by using the upper button, then adjust the minutes and confirm again. At this point, the procedure will be complete.

Watch the video!


by ScegliAuto

More videos