Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will see how to replace the front headlight bulb on the Kawasaki Vulcan 650 S, a very simple and quick operation. First, ensure that the key is not inserted for safety, then locate the two screws on either side of the headlamp and unscrew them using a Torx key. Next, grasp the headlamp, separate it from the base, and disconnect the power connector. At this point, you can remove the rubber cap, unclip the metal clip, and extract the old bulb. To fit the replacement, simply follow the reverse procedure.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front headlight bulb of the Kawasaki Vulcan 650?
How do you replace the front headlight bulb of the Kawasaki Vulcan 650?
Vulcan 650 S In order to replace the headlight bulb of the Kawasaki Vulcan 650, you need to loosen the screws that secure the headlight assembly to its housing, s…
How do you replace the headlight bulb of the Kawasaki Vulcan 650 S?
How do you replace the headlight bulb of the Kawasaki Vulcan 650 S?
Vulcan 650 S The procedure for replacing the headlight bulb on the Kawasaki Vulcan 650 involves loosening the screws that secure the headlight assembly to its hou…
How to Replace the Front Headlight on the Kawasaki Vulcan 650 S?
How to Replace the Front Headlight on the Kawasaki Vulcan 650 S?
Vulcan 650 S This tutorial shows how to replace the front headlight on the Kawasaki Vulcan 650 S, a very simple and quick operation. First, ensure that the key is…

How to Replace and Install the Front Wheel on a Beta RR 300

Today, we will go through the instructions to install or replace the front wheel on the Beta RR 300 enduro bike by following these simple steps. First, place your bike on a stand and lift the front wheel off the ground. Next, unscrew the fixing bolts of the front brake caliper to remove it. At this point, unscrew the central axle of the wheel, removing and possibly replacing the tyre. Then, tighten the fork nuts and reassemble everything by reversing the disassembly procedure!

Watch the video!


by ScegliAuto

More videos