Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today's video, learn how to remove and replace the original headlight with an LED type on the Kawasaki Vulcan 650 S, following the instructions below. Start by removing the front headlight; to do this, unscrew the fixing screws located under the headlight using a ratchet spanner; then gently remove the headlight, disconnecting the electrical connectors of the bulbs at the back of the headlight. At this point, install the new headlight, making modifications if necessary; just follow the video until the end for reassembly!

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlamp Bulb on a Kawasaki Vulcan 650 S
How to Replace the Front Headlamp Bulb on a Kawasaki Vulcan 650 S
Vulcan 650 S In this tutorial, learn how to replace the front headlamp bulb on a Kawasaki Vulcan 650 S, a straightforward and quick task. First, ensure the key is…
How to Replace the Front Headlight Bulb on the Kawasaki Vulcan 650 S?
How to Replace the Front Headlight Bulb on the Kawasaki Vulcan 650 S?
Vulcan 650 S In this tutorial, you will see how to replace the front headlight bulb on the Kawasaki Vulcan 650 S, a very simple and quick operation. First, ensure…
How do you replace the front headlight bulb of the Kawasaki Vulcan 650?
How do you replace the front headlight bulb of the Kawasaki Vulcan 650?
Vulcan 650 S In order to replace the headlight bulb of the Kawasaki Vulcan 650, you need to loosen the screws that secure the headlight assembly to its housing, s…

How to Change the Engine Oil in the Harley-Davidson Iron 883?

In this tutorial, you will learn how to change the engine oil in the Harley-Davidson Iron 883, a very simple and quick operation to perform every 12 months. First, wait for the engine to cool down, then open the filler cap located on the upper right side, disconnect the drain hose, and remove the plug by loosening the corresponding metal clamp. Once all the oil has drained from the system, replace the plug and proceed with changing the filter, which is located on the front of the engine. Finally, add new oil through the filler hole.

Watch the video!


by ScegliAuto

More videos