Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kawasaki Z900
Part: Wheel

This guide will help you dismantle and replace the front wheel or tyre of the Kawasaki Z900. First, place the motorcycle on a stand and lift the front wheel off the ground using the appropriate stand; then, undo the fixing bolts of the front brake calipers, removing them from the discs, as shown in the video. Next, unscrew the central axle of the wheel, removing it from the fork; if necessary, replace the front tyre and finally refit the wheel, checking the wear of the brake pads and then refitting the brake calipers!

Updated on 6 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Tyre on a Kawasaki Z900
How to Replace the Front Tyre on a Kawasaki Z900
Z900 In this guide, we will provide instructions to remove and replace the front tyre on a Kawasaki Z900 motorcycle. First, place the motorcycle on a stan…
How to Remove the Rear Wheel from a Kawasaki Z900?
How to Remove the Rear Wheel from a Kawasaki Z900?
Z900 To remove the rear wheel from a Kawasaki Z900, hold the nut securing the axle on the chain side; while holding this nut, loosen the one on the opposi…
How to Replace the Front Headlamp Bulb on a Kawasaki Z900?
How to Replace the Front Headlamp Bulb on a Kawasaki Z900?
Z900 To replace the front headlamp bulb on a Kawasaki Z900, you must first remove the windscreen by unscrewing its four fixing bolts. Then, loosen the und…

How do you adjust the headlights of the Kymco Xciting S 400i?

In order to adjust the headlights of the Kymco Xciting S 400i, you need to completely remove the panel that is located under the front headlight and on the top of the front fork. Once this panel has been removed, you will be able to locate the bolts underneath that allow you to adjust the angle of the headlight. By tightening this bolt, you will notice that the beam of light from the headlight will rise; conversely, by loosening the bolt, you will notice that the beam will lower. Once the adjustment is complete, you can reinsert the panel.

Watch the video!


by ScegliAuto

More videos