Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil on a Kawasaki KLX 150?

Model: Kawasaki Klx 150
Part: Engine oil

Video tutorial

To change the engine oil on a Kawasaki KLX 150, start by warming up the engine for a few minutes to thin the oil, then turn it off. Ensure the bike is stable using a centre or side stand. Position a container under the engine to collect the used oil. Locate the oil drain plug situated under the engine and use a spanner to unscrew it. Allow the oil to completely drain into the container.

Once all the oil has drained, replace the drain plug and tighten it securely. Find the oil filler cap on the side of the engine and remove it. Use a funnel to slowly pour in the recommended amount of new oil as per the owner's manual.

After pouring in the oil, replace the filler cap and tighten it well. Start the engine for a few minutes, then turn it off and check for any oil leaks.


Updated on 6 October 2026 by ScegliAuto


Related tutorials

Klx 150 In this guide, follow the steps to remove and replace the battery of the Kawasaki KLX 150 enduro bike. First, place the bike on a stand and remove th…

How to change the engine oil in the KTM 790 Adventure?

In this tutorial, you will see how to change the engine oil in the KTM 790 Adventure, a very simple and quick operation. First, wait for the engine to cool down sufficiently, then remove the lower protective cover and place a container underneath the bike. Next, locate the bolts of the two drain holes, unscrew them with a 13mm socket, and remove both secondary filters, which should be cleaned of any dirt residue. At this point, open the main filter cap, insert the replacement, reassemble everything, and pour in the required amount of oil through the designated hole.

Watch the video!


by ScegliAuto

More videos