Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the exhaust pipe of the Derbi Senda 50?

Model: Derbi Senda 50cc
Part: Exhaust muffler

Video tutorial

In order to replace the exhaust pipe installed on the Derbi Senda 50, you will need to loosen the screws that secure the exhaust terminal to its housing on the right side of the motorcycle, near the rear wheel. Once the terminal has been freed from the screws, it must be disconnected from the collector by widening the connecting ring at its base.

Once the old exhaust pipe has been removed, you can insert the new one, connecting it with a strap and then securing it with the screws of the previously removed supports.


Posted on 17 December 2024 by ScegliAuto


Related tutorials

How to Replace the Exhaust on the Derbi Senda 50?
How to Replace the Exhaust on the Derbi Senda 50?
Senda 50cc You can remove the exhaust from the Derbi Senda 50 by loosening the clamp that connects the manifold to the remaining part of the exhaust pipe. Once …
How to Replace the Exhaust on the Derbi Senda 50?
How to Replace the Exhaust on the Derbi Senda 50?
Senda 50cc To replace the exhaust on the Derbi Senda, widen the fastening ring that connects the exhaust manifold to the remaining part of the exhaust pipe: onc…
How do you replace the exhaust of the Derbi Senda 50?
How do you replace the exhaust of the Derbi Senda 50?
Senda 50cc On the Derbi Senda 50 it will be possible to remove the exhaust from its housing by widening the connecting ring that joins the collector to the rema…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos