Do it yourself
Frequently asked questions about cars and motorcycles
The procedure for replacing the exhaust on the Derbi Senda is carried out by widening the fixing ring that connects the exhaust manifold to the remaining part of the exhaust pipe: once this ring has been removed, it will be possible to proceed by loosening the bolt that fixes the exhaust to the respective support at the rear fender. At this point, the old exhaust can be completely removed and the new replacement piece can be inserted: this must be connected to the engine with the appropriate ring and fixed to the rear part of the vehicle.

Posted on 28 June 2024 by ScegliAuto

Video tutorial

Related tutorials

Senda 50cc In order to replace the exhaust pipe installed on the Derbi Senda 50, you will need to loosen the screws that secure the exhaust terminal to its hous…
Senda 50cc Before you begin, sit on the seat of your Derbi Senda. Start by inserting the key into the ignition switch and turning it fully clockwise. Next, pull…
Senda 50cc Before you can begin, position your Derbi Senda 50 on the side stand. Start by unscrewing and removing the bolts that secure the seat to the frame, l…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos