Do it yourself
Frequently asked questions about cars and motorcycles
To remove the exhaust of the Derbi Senda 50, it is necessary to widen the fixing ring that connects the exhaust terminal to the corresponding collector: once this connection has been removed, it will be possible to proceed by loosening the bolt that secures the exhaust to the appropriate support near the rear fender. At this point, the old exhaust can be completely removed, and the new replacement part can be inserted: the latter can be connected to the engine with the appropriate ring and secured to the fender with the specific support screws.

Posted on 17 January 2026 by ScegliAuto

Video tutorial

Related tutorials

Senda 50cc On the Derbi Senda 50 it will be possible to remove the exhaust from its housing by widening the connecting ring that joins the collector to the rema…
Senda 50cc To replace the exhaust on a Derbi Senda, you need to widen the fixing ring that connects the engine block to the remaining part of the exhaust pipe: …
Senda 50cc Before you begin, sit on the seat of your Derbi Senda. Start by inserting the key into the ignition switch and turning it fully clockwise. Next, pull…

How to Replace the Coolant in the Piaggio Medley 125?

To replace the coolant in the Piaggio Medley 125, loosen the screws securing the side grille of the scooter to remove it and access the radiator underneath. At the base of the radiator, locate the drain plug, which must be unscrewed to allow the coolant to flow into a suitably positioned container. Next, open the under-seat compartment and locate the coolant refill cap: by opening this cap, you can insert the new coolant.

Watch the video!


by ScegliAuto

More videos