Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the levers on the Yamaha FZ6R?

Model: Yamaha Fz6
Part:

Video tutorial

The levers that are installed on the Yamaha FZ6R can be replaced by loosening the screws that fix them to their housings on the side of the handlebars: once these are freed from these nuts, it will be possible to disconnect the cables that are connected to them so that they can be completely detached.

After the old levers have been removed, it will be possible to position the new ones in their housings on the sides of the handlebars: at this point, it will be possible to connect and fix them properly to ensure that everything works correctly.


Posted on 17 December 2024 by ScegliAuto


Related tutorials

How to change the motor oil of a Yamaha FZ6R?
How to change the motor oil of a Yamaha FZ6R?
Fz6 To change the motor oil of a Yamaha FZ6R, start by warming up the engine for a few minutes to make the oil more fluid and easier to drain. Once the e…
How do you replace the front brake pads on the Yamaha FZ6?
How do you replace the front brake pads on the Yamaha FZ6?
Fz6 To replace the front brake pads of the Yamaha FZ6, you need to loosen the screws that secure the caliper to the corresponding disc: once the screws a…
How to Replace the Clutch on a Yamaha FZ6?
How to Replace the Clutch on a Yamaha FZ6?
Fz6 To replace the clutch on a Yamaha FZ6, you need to loosen the bolts securing the cover located on the right side of the bike, at mid-height. Once the…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos