Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the motor oil of a Yamaha FZ6R?

Model: Yamaha Fz6
Part: Engine oil

Video tutorial

To change the motor oil of a Yamaha FZ6R, start by warming up the engine for a few minutes to make the oil more fluid and easier to drain. Once the engine is turned off, place the motorcycle on a flat surface and make sure it is stable.

Under the engine, locate the oil drain plug. Prepare a basin to collect the old oil and, using a wrench, loosen and remove the drain plug.

Let the oil flow completely into the basin. When the oil has stopped flowing, clean the area around the drain plug and securely reattach it. Next, locate the oil fill plug on the top of the engine.

Using a funnel, pour the amount of oil specified in the motorcycle manual, making sure not to exceed it. Once you have finished adding the oil, put the fill plug back in place and start the engine for a few minutes to allow the oil to circulate in the system.

After turning off the engine, check the oil level and adjust it if necessary.

Dispose of the used oil properly in accordance with environmental regulations.


Posted on 17 September 2025 by ScegliAuto


Related tutorials

How do you replace the levers on the Yamaha FZ6R?
How do you replace the levers on the Yamaha FZ6R?
Fz6 The levers that are installed on the Yamaha FZ6R can be replaced by loosening the screws that fix them to their housings on the side of the handlebar…
How to Change the Engine Oil in a Yamaha FZ6?
How to Change the Engine Oil in a Yamaha FZ6?
Fz6 In this tutorial, you will see how to change the engine oil in a Yamaha FZ6, a very simple and quick operation to perform every 12 months. First, wai…
Engine Oil and Oil Filter Replacement on Yamaha FZ6 - FZ6 Fazer
Engine Oil and Oil Filter Replacement on Yamaha FZ6 - FZ6 Fazer
Fz6 In today’s tutorial, see how to replace the engine oil and oil filter while performing routine maintenance on a Yamaha FZ6 and FZ6 Fazer. First, posi…

How to Replace the Battery in a Harley-Davidson Sportster Iron 883?

In this tutorial, you will see how to replace the battery in a Harley-Davidson Sportster Iron 883, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the single bolt securing the seat, then remove the left plastic cover by unlocking the relevant clips. Next, remove the 3 fuses, disconnect the 2 terminals starting with the negative, and unscrew the bolt of the mounting bracket. At this point, you can extract the old battery, insert the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos