Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the front brake pads on the Yamaha FZ6?

Model: Yamaha Fz6
Part: Brake pads

Video tutorial

To replace the front brake pads of the Yamaha FZ6, you need to loosen the screws that secure the caliper to the corresponding disc: once the screws are loosened, you can proceed by detaching the caliper from the disc so that the pads inside can be removed.

To do this, you will need to remove the pin that locks them in place and then you can insert the new replacement pads; after they have been inserted, you can reposition the caliper on the disc in order to secure it properly with its screws.


Posted on 17 November 2025 by ScegliAuto


Related tutorials

How to Replace Brake Pads on a Yamaha FZ6
How to Replace Brake Pads on a Yamaha FZ6
Fz6 This guide shows you how to remove and replace the brake pads, both front and rear, on a Yamaha FZ6 in simple steps. First, remove the safety clips f…
How to Replace the Battery in a Yamaha FZ6?
How to Replace the Battery in a Yamaha FZ6?
Fz6 Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted,…
Engine Oil and Oil Filter Replacement on Yamaha FZ6 - FZ6 Fazer
Engine Oil and Oil Filter Replacement on Yamaha FZ6 - FZ6 Fazer
Fz6 In today’s tutorial, see how to replace the engine oil and oil filter while performing routine maintenance on a Yamaha FZ6 and FZ6 Fazer. First, posi…

Replacing the Rear Brake Pads of the BMW G310 GS

Follow these brief instructions to remove and replace the rear brake pads (this also applies to the front ones) of the BMW G310 GS motorcycle. First, place the bike on a stand and start by removing the pin and the clip from the rear brake caliper; then remove the old brake pads as shown in the video. Next, clean the caliper of any residual dirt, install the new original brake pads, and secure the pin and clip to lock everything in place, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos