Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Yamaha Fz6
Part: Brake pads

This guide shows you how to remove and replace the brake pads, both front and rear, on a Yamaha FZ6 in simple steps. First, remove the safety clips from the brake pads using a pair of pliers; then take out the hooks and extract the brake pads from the caliper, as shown in the video. At this point, clean the caliper from dirt and correctly insert the new pads, securing them with the hooks and then with the clips. Repeat the same operation for all other brakes!

Updated on 19 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Brake Pads on Yamaha FZ6
How to Replace the Rear Brake Pads on Yamaha FZ6
Fz6 To replace the rear brake pads on the Yamaha FZ6, first loosen the screws securing the brake caliper corresponding to the disc: once these screws are…
How do you replace the front brake pads on the Yamaha FZ6?
How do you replace the front brake pads on the Yamaha FZ6?
Fz6 To replace the front brake pads of the Yamaha FZ6, you need to loosen the screws that secure the caliper to the corresponding disc: once the screws a…
Engine Oil and Oil Filter Replacement on Yamaha FZ6 - FZ6 Fazer
Engine Oil and Oil Filter Replacement on Yamaha FZ6 - FZ6 Fazer
Fz6 In today’s tutorial, see how to replace the engine oil and oil filter while performing routine maintenance on a Yamaha FZ6 and FZ6 Fazer. First, posi…

How to Replace the Engine Oil and Oil Filter on an Aprilia RSV 1000

This short video will show you how to carry out the routine maintenance service by replacing the engine oil and oil filter on the Aprilia RSV 1000 motorcycle. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then use the appropriate tool to unscrew and remove the oil filter, replacing the cartridge with a new one as shown in the video. Finally, unscrew the filler screw and top up by pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos