Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Sorento
    4. : Body

Kia Sorento - Body

Body Kia Sorento (2009-2014 / mk 2)

Kia Sorento (2009-2014 / MK 2)
Side Step Installation Instructions
Remove the clips along the edge of the wheel arch to take off the splash guard. Next, remove the side skirt (screws and clips) and also take out the plastic …Read all…
Posted on 18 February 2026 by ScegliAuto
Alternator (1) Speaker (1) Shocks (3) Car stereo (5) Battery (4) Spark plugs (1) Body (1) Key (8) Timing belt (2) V-belt (2) Onboard computer (3) Checks and maintenance (8) Oil pan (1) Dashboard (2) Bearing (1) Brake rotors (1) Headlight (3) Tail light (3) Air filter (3) Cabin air filter (10) Fuel filter (1) Diesel fuel filter (3) Oil filter (1) Parking brake (2) Clutch (1) Fuel injectors (1) Accessory kit (1) Headlight bulb (5) Tail light bulb (2) Interior dome light bulb (1) (1) Handle (5) Engine (1) Starter motor (1) Transmission fluid (2) Engine oil (4) Clock (1) Door trim panel (7) Rear bumper (2) Brake pads (1) Tires (1) Shift knob (1) Pump (1) Fuel pump (1) Instrument cluster (2) Radiator (1) Heater core (1) Fuse box (21) Seat (1) Crankshaft position sensor (1) Suspension system (1) Side mirror (4) Warning light – error code (7) (4) Tire pressure warning light (7) Service warning light (42) Fuel cap (3) Windshield wipers (8) EGR valve (2) Side window (1) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos