Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Kia
    3. :
  3. Sorento
    4. : Shocks

Kia Sorento - Shocks

Shocks Kia Sorento (2002-2009 / mk 1)

Kia Sorento (2002-2009 / MK 1)
Removing the Front Shock Absorber of a Kia Sorento
Carefully follow these steps to remove the front shock absorber from a Kia Sorento. First, loosen the wheel nuts, lift the car on a column lift, and remove the …Read all…
Posted on 13 March 2026 by ScegliAuto
Kia Sorento (2002-2009 / MK 1)
How to Fit Front Shock Absorbers
In the following video, front shock absorbers are replaced and installed on a Kia Sorento. The procedure is quite complex and requires good tools and excellent …Read all…
Posted on 19 February 2026 by ScegliAuto
Kia Sorento (2002-2009 / MK 1)
Replacing Rear Shock Absorbers
In this tutorial, the rear shock absorbers of a Kia Sorento are removed and replaced. The vehicle is lifted on a ramp and the rear wheels are removed. Identify …Read all…
Posted on 15 February 2026 by ScegliAuto
Alternator (1) Speaker (1) Shocks (3) Car stereo (5) Battery (4) Spark plugs (1) Body (1) Key (8) Timing belt (2) V-belt (2) Onboard computer (3) Checks and maintenance (8) Oil pan (1) Dashboard (2) Bearing (1) Brake rotors (1) Headlight (3) Tail light (3) Air filter (3) Cabin air filter (10) Fuel filter (1) Diesel fuel filter (3) Oil filter (1) Parking brake (2) Clutch (1) Fuel injectors (1) Accessory kit (1) Headlight bulb (5) Tail light bulb (2) Interior dome light bulb (1) (1) Handle (5) Engine (1) Starter motor (1) Transmission fluid (2) Engine oil (4) Clock (1) Door trim panel (7) Rear bumper (2) Brake pads (1) Tires (1) Shift knob (1) Pump (1) Fuel pump (1) Instrument cluster (2) Radiator (1) Heater core (1) Fuse box (23) Seat (1) Crankshaft position sensor (1) Suspension system (1) Side mirror (4) Warning light – error code (7) Tire pressure warning light (12) Service warning light (42) Fuel cap (3) Windshield wipers (8) EGR valve (2) Side window (1) Steering wheel (1)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos