Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the External Mirror on Kia Picanto

Model: Kia Picanto MK 3, JA - Years 2018-2026
Part: Side mirror

Using a plastic wedge, pry off the cover located at the level of the mirror but inside the door, as shown in the video. At this point, you have access to the three screws securing the cover: unscrew them. Remove the cover and place the new mirror in position, then proceed in reverse by screwing in the fixing bolts and reassembling the plastic. If you only need to replace the glass, pry it off from behind with the plastic lever and disconnect the wires, which you will need to connect to the new mirror before snapping it into place with your hands. Good luck!

Updated on 12 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the external rearview mirror of the Kia Picanto
How to disassemble the external rearview mirror of the Kia Picanto
Kia Picanto (2004-2011 / 2A, MK 1) Today we will discover the information that will allow us to disassemble and replace the external rearview mirror of the Kia Picanto. First, we open …
How to Replace the External Wing Mirror of the Kia Picanto
How to Replace the External Wing Mirror of the Kia Picanto
Kia Picanto (2004-2011 / 2A, MK 1) To replace the external wing mirror of the Kia Picanto, pry off the triangular plastic cover located inside the door, corresponding to the mirror. On…
How to Replace the Wing Mirror on a Kia Picanto
How to Replace the Wing Mirror on a Kia Picanto
Kia Picanto (2011-2018 / TA, MK 2) Before you start, open the front door of your Kia Picanto. Begin by unclipping and removing the internal cover near the wing mirror. Next, unscrew an…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos