Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Install the Navigator in the Kia Cadenza K7

Model: Kia Cadenza K7 MK  2, YG - Years: 2016, 2017, 2018, 2019, 2020, 2021
Part: Onboard computer

See other generations:
Video tutorial

In this video, you will learn how to install the navigator in the Kia Cadenza K7. Start by removing the plastic trim on the center dashboard. Following the sequence shown in the video, remove the various accessories to free the housing where the navigator will be placed.

When removing the central display unit, make sure to disconnect the various connectors as shown in the video. Cut the blue and green wires from the connector as shown in the video and connect them to the GPS connector.

Make sure to insulate them with electrical tape to avoid false contacts. At this point, you can reassemble everything.


Updated on 21 May 2026 by ScegliAuto


Related tutorials

What is the Fuse Diagram for the KIA Cadenza?
What is the Fuse Diagram for the KIA Cadenza?
Kia Cadenza K7 (2010-2016 / MK  1, VG) In this video, you can see the fuse diagram and the location of the respective boxes in the KIA Cadenza. This is useful if a device is malfunctioning…
How to Replace the Speaker on a Kia Cadenza
How to Replace the Speaker on a Kia Cadenza
Kia Cadenza K7 (2010-2016 / MK  1, VG) To replace the speaker on a Kia Cadenza, first remove the corresponding door panel: loosen the bolts that secure it to the door, located at the handl…
How to Replace the Battery on a Kia Cadenza?
How to Replace the Battery on a Kia Cadenza?
Kia Cadenza K7 (2010-2016 / MK  1, VG) To replace the battery on a Kia Cadenza, open the hood to access the components inside the engine compartment: on the right side, near the left headl…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos