Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Cabin Air Filter Replacement

Model: Kia Sorento MK 2 - Years 2009-2014
Part: Cabin air filter

The cabin air filter is located behind the passenger side glove compartment, and to access it, you need to open and flip down the glove compartment door: start by opening the door, disconnect the end-stop cable by passing the clip through the designated opening; remove the side fastening rings and lower the door completely to access the air duct; then remove the protective cap from the filter housing and extract the old filter, ensuring there are no dirt residues; insert the new filter respecting the airflow direction, apply the cap, and reposition the glove compartment door.

Updated on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Kia Sorento (2009-2014 / MK 2) The cabin air filter is located on the passenger side behind the glove compartment door: open the door and remove the side limit stops to fully tilt …
Replacing the Cabin Air Filter
Replacing the Cabin Air Filter
Kia Sorento (2002-2009 / MK 1) The cabin air filter for this car model is located on the passenger side, just behind the glove compartment. To access the air duct and replace the f…
Cabin Air Filter Replacement
Cabin Air Filter Replacement
Kia Sorento (2009-2014 / MK 2) Frequent replacement of the pollen filter prevents allergies by purifying the air in the cabin. The filter is located behind the passenger side glove…

Other guides you may be interested in

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos