Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kymco
    3. : Superdink 125

Resetting the Service Light on a Kymco Superdink 125

Model: Kymco Superdink 125
Part: Service warning light

Video tutorial

Today's key steps will show you how to reset the service light for the regular maintenance oil change on the Kymco Superdink 125 scooter. First, place the scooter on the centre stand and turn on the ignition by turning the key to position one; then press and hold both buttons (right and left) on the instrument panel for about ten seconds to complete the reset operation, as shown in the video.

Wait for the service light to be fully reset!


Updated on 25 October 2026 by ScegliAuto


Related tutorials

How do you replace the engine oil in the Kymco Superdink 125?
How do you replace the engine oil in the Kymco Superdink 125?
Superdink 125 It will be possible to perform the oil change on the Kymco Superdink 125 by loosening the drain plug of the oil tank located in the central lower par…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos