Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the exhaust pipe of the Kymco Xciting S 400i, you need to loosen the screws that secure the exhaust terminal supports, located on the right side of the bike near the rear wheel. Once the support screws have been loosened, you can proceed by widening the clamp and then removing the exhaust pipe. The new replacement piece can now be positioned so that it can be secured with the appropriate supports; finally, it will need to be reconnected to the exhaust manifold and ensure that everything works correctly.

Posted on 19 July 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Exhaust on a Kymco Xciting S 400i
How to Replace the Exhaust on a Kymco Xciting S 400i
Xciting S 400i You can replace the exhaust on a Kymco Xciting S 400i by loosening the screws that secure the exhaust tip to its housing, located near the rear wheel…
How do you replace the exhaust pipe of the Kymco Xciting S 400i?
Xciting S 400i The replacement of the exhaust pipe of the Kymco Xciting S 400i is done by loosening the screws that fix the terminal from the exhaust to its housing…
How do you replace the muffler on the Kymco Xciting S 400i?
How do you replace the muffler on the Kymco Xciting S 400i?
Xciting S 400i On board the Kymco Xciting S 400i, it will be possible to replace the muffler by unscrewing the screws that secure the terminal from the exhaust to t…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos