Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kymco Visar
Part: Engine

In order to disassemble the engine of the Kymco Visar, you need to loosen the screws that hold it in place, so that the frame can be freed: you also need to loosen the screws of the manifolds and disconnect all the connectors. At this point, it will be possible to proceed by loosening the screws that hold the cylinder in place in order to access the piston inside: this must now be disconnected from the connecting rod so that it is possible to then detach the connecting rod from the crankshaft. At this point, it will be possible to access all the other internal components and replace them with new ones.

Posted on 19 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the air filter on the Kymco Visar?
How to replace the air filter on the Kymco Visar?
Visar To replace the air filter on the Kymco Visar, loosen the screws that secure the cover of the air filter box to its housing, located at the front of t…
How to Replace the Front Brake Pads on the Kymco Visar?
How to Replace the Front Brake Pads on the Kymco Visar?
Visar Replacing the front brake pads on the Kymco Visar, as shown in this tutorial, is a very simple and quick operation. First, position yourself in front…
How do you replace the clutch of the Kymco Visar 110?
How do you replace the clutch of the Kymco Visar 110?
Visar In order to replace the clutch of the Kymco Visar 110, you need to loosen the screws that secure the transmission case, located on the right side of …

How to Replace the Clutch Cable on the KTM Duke 125

To replace the clutch cable on the KTM Duke 125, loosen the bolt that secures the end of the cable to the clutch cover located on the right side of the bike. Once this cable is disconnected, you can detach the end at the left handlebar lever. This will allow the cable to be completely removed from its housing and replaced with a new one. Ensure it is properly secured at both ends at the lever and the clutch, checking that everything functions correctly.

Watch the video!


by ScegliAuto

More videos