Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Piaggio Vespa Gts 300
Part:

In order to disassemble the fairing of the Piaggio Vespa GTS 300, you need to loosen all the screws that fix the panels that make it up: it is advisable to start by removing the footrest compartment cover so that you can locate the screws that fix the side fairings. At this point, it will be possible to proceed by opening the underseat compartment in order to loosen the fairings that wrap around it near the rear wheel. Finally, you will need to loosen the screws that fix the front fairing and also remove the panels that surround the instrument panel at the top.

Posted on 8 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the silent blocks of the Piaggio Vespa GTS 300
How to replace the silent blocks of the Piaggio Vespa GTS 300
Vespa Gts 300 This guide provides instructions for removing and replacing the silent blocks on the Piaggio Vespa GTS 300 scooter. First, place the scooter on its c…
How to Replace the Key Fob Battery on a Piaggio Vespa GTS 300
How to Replace the Key Fob Battery on a Piaggio Vespa GTS 300
Vespa Gts 300 This guide briefly explains the instructions for removing and replacing the battery of the key fob for the Piaggio Vespa GTS 300 scooter. First, take…
How to Replace the Bulb on a Piaggio Vespa GTS 300
How to Replace the Bulb on a Piaggio Vespa GTS 300
Vespa Gts 300 To replace the bulb on the Piaggio Vespa GTS 300, you need to remove the front fairing by unscrewing the bolts located under the manufacturer's emble…

How to Access the Battery in the Benelli 180S?

In this tutorial, you will see how to access the battery in the Benelli 180S, a very simple operation useful if you need to recharge or replace it. First, ensure that the key is not inserted, then remove the passenger seat and, using the provided keys, unscrew the two bolts securing the rider's seat. Once removed, unscrew the screws of the upper plastic bracket, disconnect both terminals starting with the negative, and extract the battery from its housing. To install a replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos