Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the silent blocks of the Piaggio Vespa GTS 300

Model: Piaggio Vespa Gts 300

Video tutorial

This guide provides instructions for removing and replacing the silent blocks on the Piaggio Vespa GTS 300 scooter. First, place the scooter on its central stand and remove the exhaust silencer for better access; then unscrew the central pin of the silent block, pushing it sideways to remove it from the frame, as shown in the video.

Keep the engine elevated and install the new silent block securely; then reassemble the exhaust silencer, following the video to the end!


Updated on 16 September 2026 by ScegliAuto


Related tutorials

Vespa Gts 300 Today's instructions will show you how to remove and replace the silent blocks on the Piaggio Vespa GTS 300 scooter. First, place it on the centre st…
Vespa Gts 300 To replace the air filter on the Piaggio Vespa GTS 300, you will need to loosen the screws that secure the cover panel located on the casing near the…
Vespa Gts 300 The fuses of the Piaggio Vespa GTS 300 are located inside the front fairing of the vehicle: to access the box, press down on the ignition switch. Thi…

How to Set the Clock on the Benelli TRK 502X?

To adjust the clock on the Benelli TRK 502X, press and hold the button located at the bottom left of the instrument cluster: this will cause the hours to start flashing. By repeatedly pressing the adjacent button, you will be able to modify the hours; then press and hold the left button again to make the minutes start flashing. These can be changed in the same way as the hours, confirming by pressing the left button.

Watch the video!


by ScegliAuto

More videos