Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Silent Blocks on a Piaggio Vespa GTS 300

Model: Piaggio Vespa Gts 300

Video tutorial

Today's instructions will show you how to remove and replace the silent blocks on the Piaggio Vespa GTS 300 scooter. First, place it on the centre stand and start removing the lower plastics by unscrewing the securing screws.

Then, remove the exhaust silencer to access the silent block, as shown in the video. Next, unscrew the silent block bolts to remove it and replace it with the new original one. Fit it perfectly onto the engine block and finally reassemble all components, following the video tutorial to the end!


Updated on 11 October 2026 by ScegliAuto


Related tutorials

How to replace the silent blocks of the Piaggio Vespa GTS 300
How to replace the silent blocks of the Piaggio Vespa GTS 300
Vespa Gts 300 This guide provides instructions for removing and replacing the silent blocks on the Piaggio Vespa GTS 300 scooter. First, place the scooter on its c…
How to Replace the Wing Mirror on a Piaggio Vespa GTS 300?
How to Replace the Wing Mirror on a Piaggio Vespa GTS 300?
Vespa Gts 300 To replace the wing mirror on a Piaggio Vespa GTS 300, grasp the mirror and rotate it anti-clockwise. This will free it from its housing, allowing yo…
How to Replace the Exhaust on a Piaggio Vespa GTS 300
How to Replace the Exhaust on a Piaggio Vespa GTS 300
Vespa Gts 300 To replace the exhaust on a Piaggio Vespa GTS 300, you need to loosen the screws that secure it to its housing on the right side of the scooter, near…

How to Reset the Service Light on the Yamaha Aerox Scooter?

In this tutorial, you will see how to reset the service light on the Yamaha Aerox scooter, an extremely simple and quick operation. Before proceeding, ensure that you have completed all required scheduled maintenance tasks. Start by inserting the key and turning on the instrument panel, then use the button located on the front of the left handle to scroll through the various screens on the display. Once you reach the "Trip" option, press and hold the same button until the interval starts to flash, then turn off the ignition and turn it back on.

Watch the video!


by ScegliAuto

More videos