Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the Fuses on the Piaggio Vespa GTS 300?

Model: Piaggio Vespa Gts 300
Part: Fuse box

Video tutorial

The fuses of the Piaggio Vespa GTS 300 are located inside the front fairing of the vehicle: to access the box, press down on the ignition switch. This will cause the panel immediately under the ignition switch to open: the fuse box will be inside, in the upper left area.

Inside the box, you will find the fuses that control the operation of the front headlight, the instrument panel, the fuel pump, etc. Each fuse can be replaced with a new one of the same amperage.


Updated on 17 September 2026 by ScegliAuto


Related tutorials

Where is the fuse box on the Piaggio Vespa GTS 300?
Where is the fuse box on the Piaggio Vespa GTS 300?
Vespa Gts 300 This brief and simple guide shows you where to find the fuse box on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, open …
Fuses Location and Diagram for Piaggio Vespa GTS 300
Fuses Location and Diagram for Piaggio Vespa GTS 300
Vespa Gts 300 Today's instructions will illustrate the location and diagram of the fuse box for the Piaggio Vespa GTS 300 scooter. First, place the scooter on its …
Fuse box layout and positioning of the fuses for the Piaggio Vespa GTS 300.
Fuse box layout and positioning of the fuses for the Piaggio Vespa GTS 300.
Vespa Gts 300 In this short guide, we will see the layout and positioning of the fuses of the Piaggio Vespa GTS 300, in simple and quick steps. First of all, we pu…

How to Replace the Front Headlamp Bulb on a Harley-Davidson 883

In this tutorial, see how to replace the front headlamp bulb on a Harley-Davidson 883, a straightforward and quick operation. First, ensure the key is not inserted, then remove the outer ring of the headlamp by unscrewing the relevant bolt. Next, separate the headlamp from the base, disconnect the power connector, and remove the large rubber cap. At this point, release the metal clip, extract the old bulb, and insert the replacement, avoiding direct contact with the glass. To reassemble everything, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos