Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuses Location and Diagram for Piaggio Vespa GTS 300

Model: Piaggio Vespa Gts 300
Part: Fuse box

Video tutorial

Today's instructions will illustrate the location and diagram of the fuse box for the Piaggio Vespa GTS 300 scooter. First, place the scooter on its stand and open the glove compartment; inside, you will find a rectangular cover that you will remove, thus accessing the fuse box, as shown in the video.

In the user and maintenance manual, you will find the codes and amperages of the fuses; each fuse is associated with a function, replacing any blown fuse with a new one (respecting the amperage).


Posted on 7 March 2026 by ScegliAuto


Related tutorials

Fuse box layout and positioning of the fuses for the Piaggio Vespa GTS 300.
Fuse box layout and positioning of the fuses for the Piaggio Vespa GTS 300.
Vespa Gts 300 In this short guide, we will see the layout and positioning of the fuses of the Piaggio Vespa GTS 300, in simple and quick steps. First of all, we pu…
Where is the fuse box on the Piaggio Vespa GTS 300?
Where is the fuse box on the Piaggio Vespa GTS 300?
Vespa Gts 300 This brief and simple guide shows you where to find the fuse box on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, open …
Where are the Fuses on the Piaggio Vespa GTS 300?
Where are the Fuses on the Piaggio Vespa GTS 300?
Vespa Gts 300 The fuses of the Piaggio Vespa GTS 300 are located inside the front fairing of the vehicle: to access the box, press down on the ignition switch. Thi…

How to replace the headlight bulb in the Triumph Tiger 800?

Replacing the headlight bulb in the Triumph Tiger 800, as shown in this tutorial, is an extremely simple and quick operation. First, ensure that the key is not inserted for safety, then locate the large cap on the back of the headlamp and unscrew it. Next, disconnect the power connector by pulling it outwards, unclip the metal clip, and remove the old bulb from the housing. At this point, insert the replacement, avoiding direct contact with the glass, and follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos