Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove the Plastics on a KTM XCF 250

Model: Ktm Xcf 250
Part:

Video tutorial

Today's guide will show you how to remove and replace the plastic fairings on the KTM XCF 250 enduro bike, as well as the SXF 250. First, place the bike on a stand and start by removing the rider's seat; then remove the plastic cover of the fuel tank by disconnecting the hose and unscrewing the screws found at the top of the fairings to remove it, as shown in the video.

At this point, remove the other fairings by unscrewing the fastening screws; finally, remove the rear tail, following the video tutorial to the end!


Updated on 13 August 2026 by ScegliAuto


Related tutorials

Xcf 250 Today, follow this guide on how to perform the routine maintenance oil change on the KTM XCF-W 250 enduro bike. First, warm up the engine for a few m…
Xcf 250 In this guide, we will go through the steps to perform the routine maintenance oil change for the KTM XCF 250, as well as the SXF and EXC models. Fir…
Xcf 250 In today's tutorial video, you will see the steps to bleed and replace the coolant on a KTM XCF 250 enduro bike. First, open the expansion tank cap; …

How to Replace the Coolant in a Honda CB 500F

In this short and simple guide, you will find step-by-step instructions on how to drain and refill the coolant in a Honda CB 500F motorcycle. First, place your motorcycle on a stand and start by unscrewing the drain screw for the antifreeze, located on the water pump casing; let the fluid drain into a container for about ten minutes. Next, unscrew the radiator cap to allow the fluid to drain more quickly; finally, refill with new fluid suitable for your radiator, filling until you reach the maximum level mark!

Watch the video!


by ScegliAuto

More videos