Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In today's tutorial video, you will see the steps to bleed and replace the coolant on a KTM XCF 250 enduro bike. First, open the expansion tank cap; then remove the coolant bleed screw located on the water pump cover, as shown in the video: let the fluid drain into a container, then re-tighten the screw. Finally, pour the new coolant or antifreeze into the expansion tank, filling it to the level indicated on the tank itself!

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Plastics on a KTM XCF 250
How to Remove the Plastics on a KTM XCF 250
Xcf 250 Today's guide will show you how to remove and replace the plastic fairings on the KTM XCF 250 enduro bike, as well as the SXF 250. First, place the b…
How to Change the Engine Oil in a KTM SXF - XCF 250
How to Change the Engine Oil in a KTM SXF - XCF 250
Xcf 250 In this guide, we will go through the steps to perform the routine maintenance oil change for the KTM XCF 250, as well as the SXF and EXC models. Fir…
How to Change the Engine Oil of the KTM XCF-W 250
How to Change the Engine Oil of the KTM XCF-W 250
Xcf 250 Today, follow this guide on how to perform the routine maintenance oil change on the KTM XCF-W 250 enduro bike. First, warm up the engine for a few m…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos