|
Do it yourself
| |||
| ||||
Model: Ktm Xcf 250
Today, follow this guide on how to perform the routine maintenance oil change on the KTM XCF-W 250 enduro bike. First, warm up the engine for a few minutes and start by loosening the oil drain bolt located under the engine, using a 13 mm socket or spanner; allow the oil to drain into a container for about ten minutes. Next, unscrew the screws of the oil filter cover, removing and replacing the cartridge with a new one; finally, pour in the new oil by unscrewing the filler cap!
Updated on 18 May 2026 by ScegliAuto
Video tutorial
Related tutorials
Xcf 250
In this guide, we will go through the steps to perform the routine maintenance oil change for the KTM XCF 250, as well as the SXF and EXC models. Fir…
Xcf 250
In today's tutorial video, you will see the steps to bleed and replace the coolant on a KTM XCF 250 enduro bike. First, open the expansion tank cap; …
Xcf 250
Today's guide will show you how to remove and replace the plastic fairings on the KTM XCF 250 enduro bike, as well as the SXF 250. First, place the b…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.111
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
