Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Dismantle the Carburettor of the Peugeot Elyseo 50

Model: Peugeot Elyseo 50
Part: Carburetor

Video tutorial

This guide shows you how to dismantle and replace the carburettor of the Peugeot Elyseo 50 scooter. First, place your scooter on the centre stand and disconnect the fuel line from the carburettor, removing the air filter box if present; then disconnect the throttle cable by unscrewing the two screws located at the top of the carburettor, as shown in the video.

Next, unscrew the screws of the intake manifold, then remove the carburettor; all that’s left is to clean it or replace it with a new one!


Updated on 14 August 2026 by ScegliAuto


Related tutorials

How do you replace the carburetor of the Peugeot Elyseo 50?
How do you replace the carburetor of the Peugeot Elyseo 50?
Elyseo 50 In order to replace the carburetor of the Peugeot Elyseo 50, you need to loosen the screws that secure the rear side fairing of the motorcycle, which…
How to Replace the Drive Belt on a Peugeot Elyseo 50
How to Replace the Drive Belt on a Peugeot Elyseo 50
Elyseo 50 This guide provides instructions for removing and replacing the drive belt on the Peugeot Elyseo 50 scooter. First, place the scooter on its centre s…
How to Replace the Air Filter Box on a Peugeot Elyseo
How to Replace the Air Filter Box on a Peugeot Elyseo
Elyseo 50 In this brief guide, follow the main instructions to remove and replace the air filter box on the Peugeot Elyseo scooter. First, place your scooter o…

How to Replace the Belt and Rollers on the Piaggio Vespa GTS 300

This guide briefly outlines the steps to remove and replace the belt and rollers of the variator on the Piaggio Vespa GTS 300 scooter, following the instructions below. First, place your scooter on the centre stand and begin unscrewing the screws of the transmission cover to remove it; then unscrew the nut of the fan and that of the clutch bell, as shown in the video. At this point, remove the belt and then the variator, replacing the rollers found inside; install the new belt and reassemble the transmission!

Watch the video!


by ScegliAuto

More videos