Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the carburetor of the Peugeot Elyseo 50?

Model: Peugeot Elyseo 50
Part: Carburetor

Video tutorial

In order to replace the carburetor of the Peugeot Elyseo 50, you need to loosen the screws that secure the rear side fairing of the motorcycle, which is located right above the transmission case. Once this panel has been removed, you will be able to locate the carburetor immediately above the swingarm and behind the corresponding shock absorber.

Once located, you will need to loosen the screws that secure it and disconnect the corresponding hoses: this way you will be able to insert the new replacement part and verify that everything is working properly.


Posted on 16 August 2025 by ScegliAuto


Related tutorials

How to Dismantle the Carburettor of the Peugeot Elyseo 50
How to Dismantle the Carburettor of the Peugeot Elyseo 50
Elyseo 50 This guide shows you how to dismantle and replace the carburettor of the Peugeot Elyseo 50 scooter. First, place your scooter on the centre stand and…
How to Replace the Drive Belt on a Peugeot Elyseo 50
How to Replace the Drive Belt on a Peugeot Elyseo 50
Elyseo 50 This guide provides instructions for removing and replacing the drive belt on the Peugeot Elyseo 50 scooter. First, place the scooter on its centre s…
How to Replace the Air Filter Box on a Peugeot Elyseo
How to Replace the Air Filter Box on a Peugeot Elyseo
Elyseo 50 In this brief guide, follow the main instructions to remove and replace the air filter box on the Peugeot Elyseo scooter. First, place your scooter o…

How to Change the Engine Oil in a Triumph Speed Triple

In this tutorial, we will see how to change the engine oil in a Triumph Speed Triple, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the bike, locate the drain plug, and unscrew it using a socket wrench. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the plug. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos