Do it yourself
Frequently asked questions about cars and motorcycles
  1. Motorcycles
  2. :
  3. Kymco
  4. : Peoples 200
Today, you will learn how to replace the spark plug on your Kymco Peoples. First, unscrew the screws of the plastic located on the footboard of your scooter to access the area where the front part of the engine is located, specifically the spark plug. After unscrewing the screws, unlock the clips and remove the cover. Now, pull the spark plug cap and take a suitable spark plug removal tool (usually provided with the scooter), insert it onto the spark plug, and place the screwdriver in the hole of the tool and unscrew the spark plug.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

Peoples 200 In today's tutorial, you will learn how to remove and replace the battery of a Kymco People 200 S scooter. To access the battery, first remove the pl…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos