Do it yourself
| ||||
|
Model: Kymco Xciting S 400i
In today's video we see how to remove the rear tire of the Kymco Xciting S. First of all, we recommend operating with a cold engine, as we operate in areas in contact with metal and hot parts. We park the vehicle on the central stand. We begin the work by extracting the exhaust from its seat, also removing the heat bulkhead. At this point we also remove the side support arm. We then remove the rear disc brake and the components that hinder us from proceeding. Finally, we extract the wheel with the rim from its seat, and operate on the component in question.
Posted on 1 November 2022 by ScegliAuto
This video is currently unavailable
|
How do you replace the fork of the Beta Xtrainer?The replacement of the Beta Xtrainer fork is done by loosening the screws that fix the front wheel to its housing: the screws will be located on the sides of the lower part of the fork. Furthermore, it will be necessary to unscrew the screws that fix the front brake caliper, so that it is removed from the disc. Now it will be possible to proceed by removing the wheel so that the fork is released: the fork must in turn be detached from its housing by loosening the screws on the upper part and removing the clamps corresponding to the fender. By doing so, it will be possible to insert the new fork and assemble all the removed parts. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |