Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Kymco
    3. : Dtx 350i

Model: Kymco Dtx 350i
Part: Engine oil

To change the engine oil of the Kymco DTX 360, loosen the drain plug of the oil sump, located near the rear wheel on the left side of the bike: once this plug is loosened, you can collect the used oil in a suitably positioned container. Once the oil has completely drained, close the drain plug and top up: this should be done through the breather located on the opposite side, also near the rear wheel.

Updated on 31 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Battery in a Kymco DTX 350i?
How to Replace the Battery in a Kymco DTX 350i?
Dtx 350i To replace the battery in the Kymco DTX 350i, loosen the screws that secure the front fairing of the motorcycle. These are located at the front of th…

How to Change the Engine Oil in an Aprilia RS 660?

In this tutorial, we will see how to change the engine oil in an Aprilia RS 660, a very simple operation to be done every 12 months. First, ensure that the engine is completely cold, then remove the screws securing the lower fairing and take it off. Next, place a container underneath the bike, unscrew the drain bolt with an 8 mm hex key, and let all the oil in the system drain out. At this point, you can replace the filter, reassemble everything, and add new oil through the designated fill hole.

Watch the video!


by ScegliAuto

More videos