Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Cylinder Head Assembly of the Lml Star 125

Model: Lml Star 125
Part: Cylinder head

Video tutorial

In this video tutorial, you will learn how to remove the cylinder head assembly, which includes the cylinder head, cylinder, and piston, of the Lml Star 125, as well as the Piaggio Vespa PX 125. This procedure can be performed even with the engine mounted on the chassis; start by unscrewing the cylinder head fastening nuts using a socket wrench with an extension, as shown in the video.

Now, pull the cylinder upwards; then remove the piston retaining clip to take out the pin, sliding the piston out. Now you can replace the cylinder head assembly with the new one!


Updated on 13 May 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil Pump of the LML Star 125
How to Replace the Engine Oil Pump of the LML Star 125
Star 125 In this brief and simple guide, we will see the instructions to disassemble the engine oil pump of the LML Star 125. To disassemble the oil pump, it …
How to Remove the Front Wheel of an LML Star 125
How to Remove the Front Wheel of an LML Star 125
Star 125 Before starting, lift your LML Star 125. Begin by turning the wheel fully to the right, allowing easy access to all the fixing bolts. Then, unscrew a…
How to Replace the Fuel Tank on an LML Star 125
How to Replace the Fuel Tank on an LML Star 125
Star 125 Today's instructions will show you how to remove and replace the fuel tank on the LML Star 125, as well as the Piaggio Vespa PX 125. First, place the…

How to Set the Clock on the Yamaha Tmax 500

To adjust the clock on the Yamaha Tmax 500, turn on the instrument panel and press and hold the RESET and SELECT buttons located on the left side of the instrument panel: after a few seconds of holding the buttons, you will notice the hours start to flash. Pressing the RESET button repeatedly will change the hours; now pressing SELECT will cause the minutes to start flashing, which can be modified in the same way. After the reset, confirm everything with the SELECT button.

Watch the video!


by ScegliAuto

More videos