Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Rr 300
Part: Bearing

To replace the rear wheel bearing on a Beta RR 300, loosen the bolts that secure the wheel to its housing: once the wheel's securing bolts and the corresponding axle have been removed, you can detach the wheel from the swingarm. Doing this will allow you to loosen the bolts securing the corresponding sprocket, which can then be removed. At this point, the bearing at the centre of the wheel can be removed using a puller; the new bearing can then be inserted and all components can be reassembled.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Gear Oil on a Beta RR 300
How to Change the Gear Oil on a Beta RR 300
Rr 300 Today, let’s discover how to perform routine maintenance by changing the transmission oil on the Beta RR 300 enduro bike. First, place your bike on a…
How do you replace the engine oil of the Beta RR 300?
How do you replace the engine oil of the Beta RR 300?
Rr 300 To perform the oil change on the Beta RR 300, you will need to loosen the drain plug of the oil pan located in the central lower part of the motorcyc…
How to Replace the Engine Oil in a Beta RR 300?
How to Replace the Engine Oil in a Beta RR 300?
Rr 300 To replace the engine oil in the Beta RR 300, loosen the drain plug located at the central lower part of the bike: once it is removed, you can collec…

How to Replace the Spark Plug on a Piaggio Vespa SXL 125 Scooter?

In this tutorial, you will see how to replace the spark plug on a Piaggio Vespa SXL 125 scooter, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety. Start by unscrewing the indicated screw and opening the small lower door, then disconnect the connector from the spark plug and begin unscrewing it using a long 16 mm socket. Once completely removed, insert the replacement and tighten it without applying excessive force, as it could be damaged. Finally, reconnect the connector and reposition the door.

Watch the video!


by ScegliAuto

More videos