Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Beta Rr 300
Part: Bearing

To replace the swingarm bearing on a Beta RR 300, first, remove the nut that secures the central axle of the rear wheel so that it can be taken out of its housing. Once the wheel is removed, you can also unscrew the bolts that secure the brake caliper, removing it to access the swingarm connection. The relevant bearing will be present here, which needs to be extracted from its housing and replaced with a new spare part; after replacement, reassemble all previously removed components.

Updated on 1 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Wheel Bearing on a Beta RR 300?
How to Replace the Rear Wheel Bearing on a Beta RR 300?
Rr 300 To replace the rear wheel bearing on a Beta RR 300, loosen the bolts that secure the wheel to its housing: once the wheel's securing bolts and the co…
How to Replace the Engine Oil in a Beta RR 300?
How to Replace the Engine Oil in a Beta RR 300?
Rr 300 To replace the engine oil in the Beta RR 300, loosen the drain plug located at the central lower part of the bike: once it is removed, you can collec…
How do you replace the exhaust pipe of the Beta RR 300?
How do you replace the exhaust pipe of the Beta RR 300?
Rr 300 To ensure that the exhaust of the Beta RR 300 happens, you will need to loosen the screws that fix the exhaust terminal to its housing: the latter wi…

How to Replace the Headlight Bulb on the Keeway RKS 125?

In this tutorial, we will see how to replace the headlight bulb on the Keeway RKS 125, a very simple and quick operation. First, ensure that the instrument panel is off to operate safely, then unscrew the two bolts of the handlebar using an Allen key. Next, unscrew the bolts located at the front of the instrument panel with a socket wrench, move the headlight unit forward and disconnect the power connector. At this point, simply remove the rubber cap, unclip the metal clip, replace the bulb, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos