Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. LYNK&CO
  4. :
  5. Lynkeco 01
  6. : Checks and maintenance

LYNK&CO 01 - Checks and maintenance

Checks And Maintenance LYNK&CO 01 (2021-2028 / mk 1)

LYNK&CO 01 (2021-2026 / MK 1)
The maintenance of a Link & Co 1

In this video, we are taken on a quick tour around the maintenance of a Lynk & Co 01: a Chinese car from the Volvo Group? No, it's Volvo that is part of the …Read all…
Posted on 29 May 2025 by ScegliAuto
LYNK&CO 01 (2021-2026 / MK 1)
How to Adjust the Seat and Wing Mirror on the Lynk&Co 01

This guide will show you how to adjust the front seat and the external wing mirror of the Lynk&Co 01. First, get into the vehicle and start adjusting the front …Read all…
Posted on 21 September 2026 by ScegliAuto
LYNK&CO 01 (2021-2026 / MK 1)
How to Set the Ambient Lights on the Link&Co 01

Briefly, here are the instructions to set the colour of the ambient lights on the Link&Co 01, following these simple and quick steps. First, get inside the …Read all…
Posted on 20 September 2026 by ScegliAuto
LYNK&CO 01 (2021-2026 / MK 1)
How to monitor the charge status of the Link&Co 01

This guide briefly outlines the instructions to monitor the battery charge status of the Link&Co 01. First, open the side flap and insert the charging plug …Read all…
Posted on 8 August 2026 by ScegliAuto
LYNK&CO 01 (2021-2026 / MK 1)
How to Connect Your Smartphone to the Link&Co 01 Multimedia System

Here are the instructions that will allow you to connect your smartphone to the Link&Co 01 multimedia system by following these simple steps. First, get in the …Read all…
Posted on 5 August 2026 by ScegliAuto

Body (1) Key (4) Onboard computer (2) Checks and maintenance (5) Brake rotors (1) Fuse box (1) Seat (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos