Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Quanto
    4. : Mahindra Quanto alternator belt replacement

Mahindra Quanto - Video tutorial

Model: Mahindra Quanto MK 1 - Years 2012-2020
Part: V-belt
Operation: Mahindra Quanto alternator belt replacement

Today we will see, in this video tutorial, how to remove and replace the Mahindra Quanto alternator belt, following the instructions below. First of all we lift the car and begin to loosen our belt tensioner, using a star or socket wrench; we then remove the old belt from the alternator and the other pulleys. At this point we are going to install the new alternator belt, inserting it in the correct direction; make sure that it is perfectly inserted, checking it by hand, loosening the belt tensioner and then putting it back in its initial position.


Posted on 26 May 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos