Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Key Battery on the Mahindra Marazzo

Model: Mahindra Marazzo MK 1 - Years 2018-2025
Part: Key

To replace the remote key battery on this vehicle model, refer to the information below and the images in the video for guidance. First, take a sharp object to pry open and remove the back cover. Underneath, you will find the compartment that holds the CR 2032 battery. Remove the old battery and replace it with the new one, ensuring the positive terminal is facing up. Then, take the back cover and snap it back into place by pressing it with your fingers.

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Mahindra Marazzo (2018-2025 / MK 1) To replace the battery on a Mahindra Marazzo, open the hood to access the device located in the center area just below the windshield. Once the devic…
Mahindra Marazzo (2018-2025 / MK 1) If you want to locate the fuse box on your Mahindra Marazzo safely and independently, just follow these instructions carefully. First, park the car s…
Mahindra Marazzo (2018-2025 / MK 1) The spare tire of the Mahindra Marazzo is not located under the trunk floor as one might expect but is installed at the bottom of the vehicle. To use…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos