Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Xuv300
    4. : Checks and maintenance

Mahindra Xuv300 - Checks and maintenance

Mahindra Xuv300 (2019-2024 / MK 1)
How to install an additional horn on the Mahindra Xuv300?
In this video, we see step by step how to install an additional sound horn on the Mahindra Xux300. First, we obtain the new horn by purchasing it on Amazon …read all…
Posted on 9 July 2023 by ScegliAuto
Mahindra Xuv300 (2019-2024 / MK 1)
How to reset service in Mahindra XUV300?
In this tutorial we can see how to reset the service in the Mahindra XUV300. Before carrying out this simple and quick operation we will obviously have to …read all…
Posted on 25 December 2022 by ScegliAuto
Mahindra Xuv300 (2019-2024 / MK 1)
How to reset service light in Mahindra Xuv300?
Let's see how to reset the service light in Mahindra Xuv300. First we get into the car and turn on the instrument panel, then we open the menu on the car radio …read all…
Posted on 8 December 2022 by ScegliAuto
Mahindra Xuv300 (2019-2024 / MK 1)
How to get the Mahindra Xuv300 serviced?
The video shows us all the steps to follow to carry out a complete service on the Mahindra Xuv300 without going to the mechanic and saving in terms of labor …read all…
Posted on 4 August 2022 by ScegliAuto
Airbags (2) Loudspeaker (1) Battery (2) Bodywork (1) Key (5) -board computer (2) Checks and maintenance (4) Cabin air filter (2) Diesel filter (1) Headlight bulb (2) Door panel (1) Instrument cluster (2) Radiator (1) Fuse box (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos