Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Xuv300
    4. : How to install an additional horn on the Mahindra Xuv300?

Mahindra Xuv300 - Video tutorial

Model: Mahindra Xuv300 MK 1 - Years 2019-2024
Part: Checks and maintenance
Operation: How to install an additional horn on the Mahindra Xuv300?

In this video, we see step by step how to install an additional sound horn on the Mahindra Xux300. First, we obtain the new horn by purchasing it on Amazon with the code Hella 011225832. Two pieces cost 699 rupees (8.62 euros), while the connector set can be found on AliExpress with the code _mMPW1GD, and the prices vary depending on the kit we are interested in, but it costs a maximum of 8.45 euros. If you are electronics enthusiasts, it will not be difficult for you to follow the instructions of the YouTuber who shows you exactly how to make the bridge to connect the horn to the bracket near the passenger headlight. To get there, it will be necessary to remove the plastic cover that protects the radiator, but it is very simple, and described step by step. You will not remove the old sound horn, but you will add the new one next to it.


Posted on 9 July 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos