Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mahindra
    3. :
  3. Xuv300
    4. : Where is the fuse box of the Mahindra XUV300 located?

Mahindra Xuv300 - Video tutorial

Model: Mahindra Xuv300 MK 1 - Years 2019-2024
Part: Fuse box
Operation: Where is the fuse box of the Mahindra XUV300 located?

If you are looking for the fuse box inside your Mahindra XUV300 and have not been able to locate it yet, do not worry because you just need to carefully read the following instructions. First, go inside the cabin and make sure your XUV300 is completely turned off and parked safely. Then, locate the small compartment in the lower left area of the dashboard and proceed to remove the cover with your own hands. Once you have completed this simple operation, you will finally have access to the fuses you were looking for.


Posted on 3 September 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos