Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mahindra
  4. :
  5. Xuv300
  6. : Where is the fuse box on the Mahindra XUV300

Mahindra Xuv300 - Video tutorial

Model: Mahindra Xuv300 MK 1 - Years 2019-2024
Part: Fuse box
Operation: Where is the fuse box on the Mahindra XUV300

The fuse box inside your Mahindra XUV300 is very well hidden inside the cabin for safety reasons. Below we will give you all the various indications useful for identifying it in a few seconds. Furthermore, if you intend to carry out maintenance on the fuses themselves, it is advisable to disconnect the battery. Then go inside the car and reach the driver's seat. Locate the small compartment located in the lower area of the dashboard to the left of the steering wheel and remove the cover so that you finally have access to the fuses you were looking for.


Posted on 20 April 2023 by ScegliAuto

Other guides that may interest you

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos